Copper Patina
A copper golem monument that freezes or hastens patina. Sitting freezes and polishes; standing, running, or star weathers toward exposed, weathered, or oxidized. Ring Tier fuels duration; secondary Tier sets reach.
Pattern
Hover a tile to name it. Reading pattern diagrams explains the symbols.
- Tier block × 8Every T is the same block, and that block’s Tier sets the rune’s strength.
- Air or a Tier 0 block × 20Leave these as air, or fill them with Tier 0 blocks such as dirt or stone.
- Activation blockThe glowing cell is the one to click.
Keys
- Raw Copper Block × 1stays after use
- Any Lightning Rod × 4needs a particular block state · stays after use
Takes any of 8 blocks
- Any Lightning Rod: Exposed Lightning Rod, Lightning Rod, Oxidized Lightning Rod, Waxed Exposed Lightning Rod, Waxed Lightning Rod, Waxed Oxidized Lightning Rod, Waxed Weathered Lightning Rod, Weathered Lightning Rod
/runic buildplaces Lightning Rod. - Honeycomb Block × 1stays after use
- Any block with a Tier of 1 or more × 1Tier 1 or higher; a Tier 0 block reads as empty · may repeat the Tier block · stays after use
Takes any of 1193 blocks
/runic buildplaces Acacia Log. - Any Copper Golem Statue × 1stays after use
Takes any of 8 blocks
- Any Copper Golem Statue: Copper Golem Statue, Exposed Copper Golem Statue, Oxidized Copper Golem Statue, Waxed Copper Golem Statue, Waxed Exposed Copper Golem Statue, Waxed Oxidized Copper Golem Statue, Waxed Weathered Copper Golem Statue, Weathered Copper Golem Statue
/runic buildplaces Copper Golem Statue.
How it works
Copper Patina is a copper golem monument that rules the weathering of copper around it. Two kinds of Tier block play separate roles:
- The fuel sits on the copper base and sets how long the monument holds: five minutes per Tier, per block.
- The standing block under the golem sets the reach and the pace, and it is never spent.
Right-click the copper golem to raise it. Copper Patina raised (radius 24, 900s, oxidation +75%). Pose the golem to freeze or weather copper.
The golem's pose
Right-click the golem to change its pose, and the pose sets what copper within reach may become:
| Pose | Copper within reach |
|---|---|
| Sitting | Stops weathering, and lightning cannot scrape it. The monument's own copper stays bright. |
| Standing | Weathers up to Exposed. |
| Running | Weathers up to Weathered. |
| Star | Weathers all the way to Oxidized. |
| Standing block Tier | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|---|---|---|---|---|---|---|---|
| Radius | 8 | 16 | 24 | 32 | 40 | 48 | 64 |
| Weathering pace | 25% | 50% | 75% | 100% | 125% | 150% | 200% |
The pace compares with the natural rate, so above Tier 4 copper weathers faster than it would on its own.
Fuel
When time runs low, the monument draws a Qixsilver Reservoir in your Domain, then an Aether Chest on the base, then the next Tier block on the base, clockwise. Sneak and right-click the golem to lower it.
Configuration
These are the defaults in plugins/Runic/runes/copperpatina.yml. Every rune file also carries the shared settings described in Rune files.
| Setting | Default | What it does |
|---|---|---|
ticks-per-tier | 6000 | Game ticks of patina per consumed ink Tier (duration = this × Tier). |
advance-chance-divisor | 200 | Surplus pulse only (speed > 100): chance per eligible block is (speed − 100) / this. |
pulse-ticks | 40 | Game ticks between surplus oxidation pulses (skipped when secondary-ink speed ≤ 100). |
max-advances-per-pulse | 64 | Cap on blocks advanced in one surplus pulse (lag guard). |
Settings by Tier
| Setting | Tier 1 | Tier 2 | Tier 3 | Tier 4 | Tier 5 | Tier 6 | Tier 7 |
|---|---|---|---|---|---|---|---|
radii-by-tierSpherical radius in blocks per secondary-ink Tier. | 8 | 16 | 24 | 32 | 40 | 48 | 64 |
speed-percent-by-tierPercent of vanilla copper oxidation (BlockFormEvent) throughput per secondary-ink Tier. Values at or below 100 gate natural forms; above 100 allow all in-cap forms and add surplus pulse advances of (speed − 100)% / advance-chance-divisor. | 25 | 50 | 75 | 100 | 125 | 150 | 200 |
Messages
9 messages this rune can show
| Key | Default text |
|---|---|
need-ink | Place a Tier block on the copper base to raise the Copper Patina. |
need-secondary-ink | Place a Tier block under the golem to set the Copper Patina's reach. |
raised | Copper Patina raised (radius {radius}, {seconds}s, oxidation +{speed}%). Pose the golem to freeze or weather copper. |
lowered | The Copper Patina settles — copper weathers on its own again. |
broken | The Copper Patina fades — its monument is gone. |
spent | The Copper Patina settles — the fuel ring is empty. |
persistence-failed | The Copper Patina could not be raised safely. |
recharged | The Copper Patina drinks the offering (+{added}s). |
chest-recharged | The Aether Chest feeds the Copper Patina (+{added}s). |